Upload the tatima — a photo, a scan or a PDF — and trace the boundary. You get the exact plot area from a surveyor's closed traverse, a dimensioned drawing, a CAD file, and a link to send your architect. Optimising a compliant scheme on that boundary is coming soon.
Upload the revenue map, click the corners, type each side length. We close the traverse and build the real plot.
Drop in the surveyor's AutoCAD PDF. We read the contours, trees, nallah and poles — no external tools.
The engine searches block counts, footprints, storeys and program to maximise units within FAR, setbacks, ECS and terrain.
Site plan, floor plans, elevations & sections, terraced site section, and full area statements — as PDF sheets.
Blocks placed on terraces along the contours, hill-cut ≤ 3.5 m, program split into housing, commercial and community.
Block-wise, floor-wise built-up; FAR permissible vs achieved; land-use bands checked against Appendix-7.
Required vs achieved ECS at 23/28/32 m² for open/stilt/basement — reconciled automatically.
Schematic elevation and section with floor levels, stilt parking and parapet — Sheet 3.
Real ground profile from the survey, with your blocks stepped on plinths and retaining walls.
Carpet, balcony, external wall, built-up, common and super area — per flat, per floor.
Most tools draw what you tell them. FullArchitect searches the design space — block count, footprints, storeys, program and unit mix — and returns the scheme that maximises what you get while staying inside every rule and the terrain. Change the objective to max units, max saleable area, or max revenue.
No subscription, no sign-up. Measure as many plots as you like.
Start from the tatima in your pocket — the exact area, a dimensioned drawing and a share link, in about two minutes.
